Part#: 94655-B-FSA-IMP-L
Complete Trailer Brake Setup, with drums, seals, Bearings, Brake shoes, new hardware, backing plates, for one axle!
for 3500# axles from Dexter, AL-KO, AXIS, Quality, and others!
Benefits of Never Adjust Backing Plates
- Eliminates brake adjustments
- Brakes automatically adjust to deliver optimum performance and braking power
- Reduce stopping distances 50 percent more than other brakes
If you have a trailer without brakes, and you want to add them, this kit has what you will need. This kit fits standard 3500# axle, either Spring or Torsion, EZ lube or Standard.
Most 5 bolt wheel trailers are 3500# axles. (does yours have a 2-3/8" axle tube?) Some small trailers (usually with small tires and a 1-5/8" axle tube) will have the smaller spindles, and for those you will need a smaller (or larger) brake kit ) Look at the measurements below if you are not sure.
Measurements from Center Bolt Hole to Center Bolt Hole is 2 7/8" on Backing Plate
This Kit Includes:ONE - New 10" brake drums, 6 x 5.5" bolt pattern with races already pressed in
All hardware to attach backing plates to axle mount plate (special 7/16 nuts).
All brake hardware, springs, levers, magnets, shoes, etc.
New inner grease seals
All New Wheel Bearings (Shipping loose with kit):
ONE - 1.7" 10-19 seals
ONE - L44649 bearing
ONE - L68149 bearing
FIVE - Matching lug nuts, 1/2-20
ONE- New EZ Lube Dust Cap
In addition, you should see a small square plate welded to the axle tube, with 4 holes, (to bolt the brake plate to) and your axle tube will be about 2 1/4" OD. If you have a 2.75" axle tube, it is the larger 5200, 6000, or 7000# axle, and if you have the smaller 1-5/8" axle tube, it has the smaller 2000/2200# axle
This auction is for a trailer with a 6 bolt, 5.5" bolt pattern! I stock all sizes, so please check my other auctions or specify you want a different size!
You might also like
